ADVANCED SPIN COATING SYSTEM WITH 10 INCH WORKING CHAMBER
spinNXG-P2
Bigger Substrates are no longer a problem in Spin Coating. Apex brings to you SpinNXG-P2 which is made to handle Bigger substrates with ease even high rotational speeds upto 10000 RPM. Safety is a major concern when the angular momentum big, thus SpinNXG-P2 comes pre-loaded with integrated Lid-Interlock ensuring safety during the coating process. It also houses an in-situ dispensing port over the photoresist Lid and houses a bigger graphical LCD console to display RPM V/s Time graph of the spin protocol in Real-Time.
Spin Coating System - spinNXG-P2
Spin Coating involves the deposition of a fine layer of coating material over a substrate. The coating material is spread over the substrate by using the centrifugal force. As such, spin coaters need to be very precise. Apex brings to you model number SpinNXG-P2 which has been made for the very purpose of precision.
Accuracy and user-friendliness
Accuracy and user-friendliness are the benchmarks for determining a product’s success. With the precision programmable spin coating system, the user has complete control over the spin coater. So SpinNXG-P2 comes with the following features :
50 pre-set programs which can be edited
A 100 steps allowance for any other program that the user wishes to write
Real time display of RPM, Timing and Program status on Graphical LCD Console
Real time display of RPM v/s Time graph on Graphical LCD Console
Input and controlling through keypad along with non-volatile program memory
Host of Features for Better Research
Spin Coater NXG-P2 also has a large number of other features that make spin coating a hassle free experience. These include:
Integrated Power on/off switch with the indicator
Integrated Vacuum release switch with the indicator
Integrated Lid Protection Switch with the indicator
Integrated Digital Magnetic Lid Inter-lock
Integrated Working Chamber Illumination Facility
Option for calibration
Option for warm up
Spill Drainage facility
In Situ Sample Dispensing Port on the Transparent Photo-resist Safety Lid
Teflon coated Working Chamber of 10" diameter along with transparent photo resist safety lid
Product Specifications - SpinNXG-P2
Type: Micro-controller Controlled based
Speed Range: 100-10,000 R.P.M.[based on a Glass Substrate of Dimension 1.5" (L) X 1" (W) & Thickness 0.05"]
<±1% Error across the Full Speed Range
Acceleration: 40-5,000 R.P.M./sec[based on a Glass Substrate of Dimension 1.5" (L) X 1" (W) & Thickness 0.05"]
Duration: 1-9,999 sec/step
50 Preset Editable Programs
100 Steps (Maximum)/Program
Real-time Display of R.P.M., Timing & Program Status on Graphical LCD Console
Real-time Display of R.P.M. vs. Time Graph on Graphical LCD Console
Non-volatile Program Memory
Input & Controlling through Key-pad
PTFE coated Working Chamber of 10" Diameter
User-friendly Firmware Interface
Integrated Power On/Off Switch with Indicator
Integrated Vacuum release Switch with On/Off Indicator
Integrated Lid Protection Switch with On/Off Indicator
Integrated Digital Magnetic Lid Inter-lock
Integrated Working Chamber Illumination Facility
Calibration Option
Warm Up Option
Spill-drainage Facility
N2 & other Inert Gas Purging Port
Transparent Photo-resist Safety Lid over the Working Chamber
In-situ Sample Dispensing Port on the Transparent Photo-resist Safety Lid
Wattage: 150W
Power: Indian Standard
Learn more about the spinNXG-P2 Spin Coating System in the Product Brochure
How it works Learn more about the Spin Coating Technology under the Technology Info tab